Takeuchi TB175, Руководство оператора, Страница: 83 / 231

80
OPERATION
E4A040
Operating Procedures
Pay Attention to the Dozer Blade when
Digging
When digging deeply with the dozer blade
positioned at the front, be careful that the
boom cylinder and bucket do not hit the dozer
blade.
Operate with the dozer blade at the rear
whenever possible.
Caution on Digging Down with the Dozer
Blade
This dozer blade is designed for simple earth
pushing. Do not dig down deeply with the
dozer blade. Doing so could damage the
dozer blade and lower body.
Cautions on Operating
Cautions on Traveling
Traveling over obstacles (rocks, stumps, etc.)
may subject the body to strong shocks and
result in damage. Avoid traveling over
obstacles whenever possible. If you must do
so, keep the hoe attachment near the ground,
travel at low speed, and go over the obstacle
at the center of the crawler.
Cautions on Traveling in 2nd (High)
Speed
¡
On uneven ground, travel at low speed
and avoid accelerating, stopping or
changing directions abruptly.
¡
When a load greater than a set value is
applied during 2nd speed (high speed)
travel, the speed will automatically slow
down by switching to 1st speed (low
speed). Thereafter, when the load
becomes lighter, the speed will increase
by returning to 2nd speed (high speed).
Exercise due caution since the travel
speed changes automatically.
¡
When traveling in 2nd speed, do so with
the dozer blade at the front.
E4D0431
E4D044
E4D037