Takeuchi TB175, Руководство оператора, Страница: 68 / 231

65
OPERATION
Starting and Stopping the Engine
IMPORTANT: Do not start the engine
before the power mode lamp (L) lights.
¡
Check that the power mode lamp (L) is
lit.
¡
All the warning lamps flash and an
alarm is sounded for 2 seconds. The
meters also start functioning. After 2
seconds, only the battery charge
warning lamp (4) and engine oil
pressure / coolant level warning lamp
(2) flash, and the other lamps turn off.
¡
Turn the light switch to check that the
boom light, front light, side lights, tail
lights and meter light turn on.
¡
Check the fuel level.
If a lamp does not light or the alarm is not
sounded, the bulb may be burnt out or a wire
may be damaged. Contact a Takeuchi sales
or service outlet for repairs.
Before Starting the Engine
1. Adjust the seat for a comfortable operating
position.
2. Fasten the seat belt.
3. Check that the safety lock lever is in the
locked position.
4. Check that all the levers and pedals are
in the neutral position.
5. Insert the key into the starter switch, turn
it to the ON position, then perform the
following inspection:
L3B030
C4D006
OFF
ON
START
L3D001
FC H
4
2
L3D002
L