Stratasys uPrint, Руководство по обслуживанию, Страница: 97 / 383

4-50
Figure 4-82: Removing the 2 mounting screws from the top of the panel
11.
Remove the 24VDC power supply.
Installing the 24VDC power supply
1.
Align the 24VDC power supply with the top of the rear panel of the electronics bay and
the tab to the right of the mounting location. See Figure 4-83.
Figure 4-83: Align the 24VDC power supply
2.
Using a Phillips screwdriver, reinstall the 2 mounting screws to the top of the rear panel.
3.
Close the rear electronics bay panel.
4.
Using a Phillips screwdriver, reinstall the 2 mounting screws.
5.
Reconnect J3 1 through 4 connectors using a Phillips screwdriver.
6.
Reconnect J1 on the 24VDC power supply.
7.
Close the rear panel of the Electronics Bay.
8.
Using a
5
⁄
16
” nut driver or standard screwdriver, reinstall the 3 mounting screws.
9.
Reinstall the electronics bay. See Installing the electronics bay on page 4-20.
10.
Reinstall the side panels. See Installing the side panels on page 4-8.
11.
Reinstall the top panel. See Installing the top panel on page 4-6.
Remove the 2
mounting screws