Stratasys uPrint, Руководство по обслуживанию, Страница: 332 / 383

uPrint/uPrint SE Service Manual 6-65
TeraTerm
Using TeraTerm
When using these commands, there is a high risk of damage to the machine because the
printer does not recognize the location of any other components in the machine that may be
in the way. This means if you use the command to move the Z-Stage, you will have to make
sure that the Head is moved out of the way. The same if you want to move the X-Y axis. The
Z-Stage has to be moved out of the way. The printer does see the EOT switches and the
Home Sensors.
Required Tools
• TeraTerm software installed on workstation or lap top computer.
83.
84.
• Null modem cable (“Laplink”) with DB9 style connectors, pins 2 and 3 swapped.
85.
86.
• Computer with Windows XP, Windows Vista or Windows 7.
Connecting with TeraTerm
1.
Verify printer is powered ON.
2.
Connect the Null modem cable or USB to serial converter cable from the computer to the
printer serial port connector.
3.
Open TeraTerm:
87.
4.
Once TeraTerm is started the New Connection Window will come up, see Figure 6-385. If
the New Connection window does not open, click
File > New Connection.
Note: Version 4.71 is used for these instructions, other version may function
differently.
Note: If your computer does not have a serial port, connect through a quality
USB to serial converter. We recommend the IOGEAR GUC232A.