Stratasys uPrint, Руководство по обслуживанию, Страница: 166 / 383

uPrint/uPrint SE Service Manual 4-119
5.
Using a
5
⁄
16
” nut driver or standard screwdriver, remove the right side access panel
mounting screws and remove the right side access panel. See Figure 4-204.
Figure 4-204: Right side access panel mounting screw locations
6.
Remove the toggle head assembly. See Removing the toggle head assembly on page 4-58.
7.
Remove the head board. See Removing the head board on page 4-76.
8.
Remove the TC Amp board. See Removing the TC Amp board on page 4-82.
9.
Cut the wire tie from the umbilical hose. See Figure 4-205.
Figure 4-205: Umbilical hose wire tie location
10.
Using a
5
⁄
32
” allen wrench, remove the 2 energy chain mounting screws. See Figure 4-206.
Figure 4-206: Energy chain mounting screw locations
Remove the 7
mounting screws.
Cut and remove
the wire tie
Remove the 2
mounting screws