Stratasys uPrint, Руководство по обслуживанию, Страница: 339 / 383

6-72
6.
rt
= repeat
This command will tell the machine to repeat the previous command. The command line
takes a repeat count, and flags whether or not to ignore errors. It also flags wether or not
to show the command line of the command to be run. The command line consists of one
or more commands separated by semicolons. The entire command line must be enclosed
within double quotes. Each command within the command line consists of a name and
its parameters. The command line is run until the iteration count is reached or an error
occurs. For each iteration, each command within the command line is run in the order in
which it appears.
• The command
RT 1000 0 tm
will help troubleshoot temperature issues in
maintenance mode only.
• The command
RT 100 0 fh
or
RT 100 0 fz
will help verify any X/Y/Z sensors
that had issues before the repair are tested and operational.
Parameters:
Example:
rt 20 1 tm
Figure 6-393: Repeat
106.
signed integer count This parameter specifies the number of times the command is to be run.
signed integer ignoreErrors This parameter specifies whether errors should be ignored. A value of zero causes the
test to stop when an is encountered A value of one causes the test to run for the full
count even when errors occur.
string commandLine This parameter contains the command line of the command to be run enclosed
within double quotes. A commandline includes the name of the command followed
by it's parameters.