Still RX20 14-20, Оригинальное руководство пользователя

Страница: 99 / 600

Component Course of action
Attachments (variant)
Ensure that the attachments are mounted correctly
in accordance with the operating instructions from
the manufacturer.
Perform a visual inspection to ensure that the at-
tachments are intact and are leak-tight.
Perform checks to ensure the attachments are
working correctly.
Lift cylinders, tilt cylinders, tank, valve
block, hoses, pipes, connections
Visually inspect for damage and leakages.
Have damaged components replaced by the author-
ised service centre.
Underside
Check the area under the truck for leaking consum-
ables.
Wheels, tyres
Visually inspect for wear and damage.
Make sure that only rims of the same type from the
same manufacturer are fitted.
In the event of uneven tyre wear, replace both tyres.
Observe the safety regulations in the section enti-
tled "Tyres".
Axle
Make sure that no consumables are escaping from
the axle.
Overhead guard, guard grille (variant)
Visually inspect for sound condition.
Check for secure mounting.
Steps Make sure they are clean (free of ice, not slippery).
Panes of glass (variant)
Visually inspect for sound condition.
Make sure they are clean (also free of ice).
Handholds Check for secure mounting.
Maintenance lids Check the close function and close.
Battery hood
Make sure that there are no unused bores in the
battery hood.
Battery door
Perform a visual inspection for integrity and defor-
mation.
Check that the interlock is in good condition and is
working correctly.
Check the close function.
Close.
Battery
Check that the interlock is in good condition and is
working correctly.
Lock the battery.
Operating
4
Checks and tasks before daily use
83 56368011501 EN - 04/2022 - 13