Still RX20 14-20 Скачать руководство пользователя страница 35

Страница: 35 / 600

Driving on upward and downward gradients

is permitted provided the specified data and

specifications are observed, see the "Routes

"chapter.
The truck is suitable for indoor and outdoor

use in countries ranging from the Tropics to

Nordic regions (temperature range: -20°C to

+40°C).
If the truck is to be used in a cold store, it must

be configured accordingly and, if necessary,

approved for such an environment; see the

chapter entitled "Cold store application".

CAUTION

Batteries can freeze!
If the truck is parked in an ambient temperature of

below -10°C for an extended period, the batteries will

cool down. The electrolyte may freeze and damage

the batteries. The truck is then not ready for opera-

tion.

–

At ambient temperatures of below -10°C, only

park the truck for short periods of time.

The operating company must ensure suitable

fire protection for the relevant application in

the truck's surroundings. Depending on the

application, additional fire protection must be

provided on the truck. If in doubt, contact the

relevant authorities.

NOTE

Please observe the definition of the following

responsible person: "operating company".

Foreword

Using the truck

56368011501 EN - 04/2022 - 13

Содержание RX20 14-20

























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX20 14-20

Отзывы:

Бренды по названию

Популярные бренды

Still RX20 14-20, Оригинальное руководство пользователя

Результаты поиска

Содержание RX20 14-20

Отзывы:

Бренды по названию

Популярные бренды