Still RX20 14-20 Скачать руководство пользователя страница 540

Страница: 540 / 600

–

The belt tongue (2) must release when the

red button (4) is pressed.

–

The automatic blocking mechanism must be

tested at least once a year:

–

Park the forklift truck on level ground.

–

Pull out the belt with a jerk.

The automatic blocking mechanism must

block extension of the belt.

–

Tilt the seat at least 30 ° (if necessary, re-

move the seat).

–

Slowly extend the belt.

The automatic blocking mechanism must

block extension of the belt.

Cleaning the seat belt

–

Clean the seat belt as necessary, but with-

out using chemical cleaning materials (a

brush will suffice).

Replacement after an accident

As a rule, the seat belt must be changed after

an accident.

Checking the driver's seat

WARNING

Risk of injury!

–

After an accident, check the driver's seat with at-

tached restraining belt and fastening.

–

Check the controls for correct operation.

–

Check the condition of the seat (e.g. wear

on the upholstery) and secure fastening to

the hood.

WARNING

Risk of injury!

–

Have the seat repaired by the service centre if you

identify any damage during the checks.

7090_342-005



6327_342-010



Maintenance

Preserving operational readiness

524

56368011501 EN - 04/2022 - 13

Содержание RX20 14-20

























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX20 14-20

Отзывы:

Бренды по названию

Популярные бренды

Still RX20 14-20, Оригинальное руководство пользователя

Результаты поиска

Содержание RX20 14-20

Отзывы:

Бренды по названию

Популярные бренды