Still RX20 14-20 Скачать руководство пользователя страница 402

Страница: 402 / 600

The tow coupling is opened.

–

Slowly drive the truck forwards until the tow-

ing eye and towing jaws are disconnected.

–

Close the tow coupling by actuating the

closing lever (1).

NOTE

To protect the lower coupling pin bush against

contamination, always keep the tow coupling

closed.

Coupling model RO*245

NOTE

Tow coupling RO 245 is intended for a tow-

ing eye in accordance with DIN 74054 (bore

diameter 40 mm) or DIN 8454 (bore diameter

35 mm).

–

Take measures to prevent the trailer from

rolling away, e.g. using wedges.

–

Adjust the towing eye of the tiller so that it is

in the middle of the towing jaws.

–

Push the hand lever (5) upwards.

–

The tow coupling is opened.

DANGER

People can become trapped between the truck and

trailer!
When coupling, ensure that there are no persons

present between the truck and the trailer.

–

Slowly move the truck backwards.

DANGER

Risk of accident due to open coupling pin!
A protruding safety handle means that the tow bar

eye has not been coupled correctly. The trailer must

not be towed in this condition.

–

Make sure that the control pin does not protrude

from the control bush.

–

Repeat the coupling process if necessary.

–

Remove any items used to prevent the trail-

er from rolling away.

7321_003-066_V2



Operating

Trailer operation

386

56368011501 EN - 04/2022 - 13

Содержание RX20 14-20

























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX20 14-20

Отзывы:

Бренды по названию

Популярные бренды

Still RX20 14-20, Оригинальное руководство пользователя

Результаты поиска

Содержание RX20 14-20

Отзывы:

Бренды по названию

Популярные бренды