Still RX20 14-20, Оригинальное руководство пользователя

Страница: 302 / 600

Total load (variant)
Use the "total load" variant to calculate the
total weight of multiple loads. The "total load"
is an additional function of the "load meas-
urement". It records the individual loads and
stores up to three total loads.
This allows, for example, three different con-
tainers to be laden and their loading weight
to be determined. This function is helpful if,
for instance, a container has a limited payload
and you want to know when the permissible
load weight has been reached.
This function is useful for comparing the loads
indicated on delivery documents to the actual
loads, for example.
The procedure for adding up the total load is
as follows:
1
Pick up the load and call up the load
menu,
2 Measure the load,
3 Add/subtract the load.
WARNING
Risk to stability.
If the weight determined by a load measurement ex-
ceeds the permissible residual load capacity of the
truck, the truck cannot be operated safely.
–
Do not lift the load higher than 800 mm.
–
Set down and reduce the load immediately.
–
If necessary, use another truck with sufficient
load-bearing capacity.
NOTE
Lift the load to a height of between 300 mm
and 800 mm, since the load must subsequent-
ly be lowered slightly for the weighing process.
If the weighing process establishes that the
load is too heavy, the load must not be lifted
higher than 800 mm. The fork arms must not
touch the ground.
Picking up the load and calling up the
load menu
–
Pick up the load safely.
–
Press the button.

Operating
4
Load-dependant assistance systems
286 56368011501 EN - 04/2022 - 13