Still RX20 14-20, Оригинальное руководство пользователя

Страница: 57 / 600

The following factors can lead to a loss of
stability and are therefore prohibited:
●
Different tyres on the same axle, e.g. pneu-
matic tyres and superelastic tyres
●
Tyres not approved by the manufacturer
●
Excessive tyre wear
●
Tyres of inferior quality
●
Changing rim wheel parts
●
Combining rim wheel parts from different
manufacturers
The following rules must be observed to en-
sure stability:
●
Only use tyres with equal and permitted lev-
els of wear on the same axle
●
Only use wheels and tyres of the same type
on the same axle, e.g. only superelastic
tyres
●
Only use wheels and tyres approved by the
manufacturer
●
Only use high-quality products
Wheels and tyres approved by the manufac-
turer can be found on the spare parts list.
If other wheels or tyres are to be used, au-
thorisation from the manufacturer must be ob-
tained beforehand.
–
Contact the authorised service centre on
this matter.
When changing wheels or tyres, always en-
sure that this does not cause the truck to tilt to
one side (e.g. always replace right-hand and
left-hand wheels at the same time). Changes
must only be made following consultation with
the manufacturer.
If the type of tyre used on an axle is
changed, for example from superelastic tyres
to pneumatic tyres, the load diagram must be
changed accordingly.
–
Contact the authorised service centre on
this matter.
Safety
2
Basic principles for safe operation
41 56368011501 EN - 04/2022 - 13