Still RX20 14-20 Скачать руководство пользователя страница 195

Страница: 195 / 600

Cause

Effect

The emergency off switch is actuated.

The truck will coast to a stop.

Once the truck has come to a standstill, the

electric parking brake is applied with an audible

sound.

The LED (2) lights up with a steady light. The

symbol appears in the display.

The truck accelerates sharply, even though the

driver's seat has been vacated.

The electric parking brake is immediately ap-

plied with an audible sound.

The LED (2) lights up with a steady light. The

symbol appears in the display.

The truck accelerates sharply, even though the

accelerator pedal has not been actuated.

The parking brake is immediately applied with

an audible sound.

The LED (2) lights up with a steady light. The

symbol appears in the display.

Malfunctions in the electric park-

ing brake

DANGER

There is a risk of fatal injury from being

run over if the truck rolls away.

–

Do not park the truck on a gradient.

–

Do not leave the truck until the park-

ing brake has been applied.

–

In an emergency, secure the truck

with wedges on the downhill-facing

side to prevent it from rolling away.

–

Before leaving the truck, make sure that the

parking brake is properly applied.

Operating

Driving

179

56368011501 EN - 04/2022 - 13

Содержание RX20 14-20

























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX20 14-20

Отзывы:

Бренды по названию

Популярные бренды

Still RX20 14-20, Оригинальное руководство пользователя

Результаты поиска

Содержание RX20 14-20

Отзывы:

Бренды по названию

Популярные бренды