Still RX20 14-20, Оригинальное руководство пользователя

Страница: 325 / 600

Attachments
Fitting attachments
If the truck is equipped with an integrated at-
tachment (variant) at the factory, the specifica-
tions in the STILL operating instructions for
integrated attachments must be observed.
If attachments are fitted at the place of use,
the specifications in the operating instructions
from the attachment manufacturer must be ob-
served.
If an attachment is not delivered together with
the truck, the specifications from the manufac-
turer and the operating instructions from the
attachment manufacturer must be observed.
Before initial commissioning, the function of
the attachment and the visibility from the driv-
er's position with and without a load must be
checked by a competent person. If the visibili-
ty is deemed insufficient, visual aids must be
used, such as mirrors, a camera, a monitor
system etc.
–
Observe the following warning notices.
DANGER
Risk of fatal injury from falling load!
If attachments that hold the load by clamping it or
exerting pressure on it do not have a second method
of operating the function (lock), the load can work
loose and fall off.
–
Ensure that the second method of operating the
function (lock) is available.
–
When retrofitting such attachments, a second
method of operating the function (lock) must also
be retrofitted.
DANGER
Risk of fatal injury from falling load!
When installing a clamp with an integrated sideshift
function, ensure that the clamp does not open when
the sideshift is actuated.
–
Notify your authorised service centre before instal-
lation.
–
Never grab or climb on moving parts of the truck.
Operating
4
Attachments
309 56368011501 EN - 04/2022 - 13