Still RX20 14-20 Скачать руководство пользователя страница 245

Страница: 245 / 600

DANGER

Risk of injury!

–

Do not step on the fork.

DANGER

Risk of injury!

–

Do not step under the raised forks.

DANGER

People may be injured in the danger area of the

truck!
The danger area of the truck must be completely

clear of all personnel, except the driver in his normal

operating position. If persons fail to leave the danger

area despite warnings:

–

Cease work with the truck immediately.

–

Secure the truck against use by unauthorised par-

ties.

DANGER

Danger of death from falling loads!

–

Never walk or stand underneath sus-

pended loads.

Transporting pallets

As a rule, loads (e.g. pallets) must be trans-

ported individually. Transporting multiple loads

at the same time is only permitted:

●

when instructed by the supervisor and

●

when the technical requirements have been

met.

The driver must ensure proper condition of

the load. Only safely and carefully positioned

loads may be transported.

6327_003-009



Operating

Handling loads

229

56368011501 EN - 04/2022 - 13

Содержание RX20 14-20

























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX20 14-20

Отзывы:

Бренды по названию

Популярные бренды

Still RX20 14-20, Оригинальное руководство пользователя

Результаты поиска

Содержание RX20 14-20

Отзывы:

Бренды по названию

Популярные бренды