Still RX20 14-20 Скачать руководство пользователя страница 441

Страница: 441 / 600

DANGER

Risk of explosion due to static charge!
If the driver is electrostatically charg-

ed, touching the battery may produce

sparks. These sparks can ignite oxyhy-

drogen gas that has formed.

–

To dissipate a possible electrostatic

charge, touch an earthed component

that is situated a long way from the

battery.

DANGER

Risk of fire due to overheated connec-

tion assemblies!
Plugs that are not fully plugged in can

produce excessive heat. They pose a

fire hazard.

–

Always fully plug the mains plug and

the truck plug for the charging cable

into the relevant socket.

DANGER

Risk of fire due to overheated connec-

tion assembly!
Do not pull out the mains plug under

load as this will result in excessive wear

and pose a fire hazard.

–

If the mains plug needs be pulled

out before the end of the charging

process, cancel the charging process

manually first (see the section entitled

"Stopping the charging process man-

ually")

DANGER

Risk of explosion due to spark dis-

charge!
If the mains plug is plugged in, sparks

may occur. These sparks can ignite any

oxyhydrogen gas present in the battery

compartment.

–

Do not plug in the mains plug unless

the battery compartment of the truck

and the charging area have been suf-

ficiently ventilated.

Operating

On-board charger

425

56368011501 EN - 04/2022 - 13

Содержание RX20 14-20

























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX20 14-20

Отзывы:

Бренды по названию

Популярные бренды

Still RX20 14-20, Оригинальное руководство пользователя

Результаты поиска

Содержание RX20 14-20

Отзывы:

Бренды по названию

Популярные бренды