Still RX20 14-20, Оригинальное руководство пользователя

Страница: 520 / 600

Safety regulations for maintenance
General information
To prevent accidents during maintenance and
repair work, all necessary safety measures
must be taken, e.g.:
–
Apply the parking brake.
–
Turn off the key switch and remove the key.
–
Disconnect the battery male connector.
–
Ensure that the truck cannot move uninten-
tionally or start up inadvertently.
–
If required, have the truck jacked up by the
authorised service centre.
–
Have the raised fork carriage or the exten-
ded lift mast secured against accidental
lowering by the authorised service centre.
–
Insert an appropriately sized wooden beam
as an abutment between the lift mast and
the cab, and secure the lift mast to prevent
it tilting backwards unintentionally.
–
Observe the maximum lift height of the lift
mast, and compare the dimensions from the
technical data with the dimensions of the
hall into which the truck is to be driven.
These steps are taken to prevent a collision
with the ceiling of the hall and to avoid any
damage caused as a result.
Working on the hydraulic equip-
ment
The hydraulic system must be depressurised
prior to all work on the system.
Working on the electrical equip-
ment
Work may only be performed on the electrical
equipment of the truck when it is in a voltage-
free state. Function checks, inspections and
adjustments on energised parts must only be
performed by trained and authorised persons,
taking the necessary precautions into account.
Maintenance
5
Safety regulations for maintenance
504 56368011501 EN - 04/2022 - 13