Still RX20 14-20 Скачать руководство пользователя страница 430

Страница: 430 / 600

–

Do not place any metal objects on the bat-

tery.

–

Fully open any protective structures (e.g.

fabric-covered cab).

–

Have fire extinguishing equipment ready.

DANGER

Risk of fire due to overheated connec-

tion assemblies!
Plugs that are not fully plugged in can

produce excessive heat. They pose a

fire hazard.

–

Always fully plug the mains plug and

the truck plug for the charging cable

into the relevant socket.

DANGER

Risk of fire due to overheated connec-

tion assembly!
Do not pull out the mains plug under

load as this will result in excessive wear

and pose a fire hazard.

–

If the mains plug needs be pulled

out before the end of the charging

process, cancel the charging process

at the battery charger first.

DANGER

Risk of explosion from connecting and

disconnecting connection assemblies!
Even when the truck and the battery

charger are switched off, oxyhydrogen

gas in the vicinity can explode if connec-

tion assemblies are connected or dis-

connected.

–

Ventilate the charging area sufficient-

ly.

CAUTION

Possible component damage.
Make sure that the charging cable does not cross

any traffic routes. Do not route the charging cable

over sharp edges.

Operating

Charging quick-access

414

56368011501 EN - 04/2022 - 13

Содержание RX20 14-20

























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX20 14-20

Отзывы:

Бренды по названию

Популярные бренды

Still RX20 14-20, Оригинальное руководство пользователя

Результаты поиска

Содержание RX20 14-20

Отзывы:

Бренды по названию

Популярные бренды