Still RX20 14-20, Оригинальное руководство пользователя

Страница: 376 / 600

CAUTION
Distorted display of the surroundings. Distances and
geometric dimensions of obstacles may differ in reali-
ty from the representation on the screen.
–
Regardless of the cameras, always look in the
direction you are driving.
–
Do not rely solely on the camera system.
NOTE
●
The monitor is fitted with a cover to protect
it from operating errors.
●
The components of the camera system
must not be opened.
●
Only the authorised service centre may in-
stall and maintain the camera system.
Monitor and camera images
The cameras transmit their images to a moni-
tor mounted on the top of the right-hand A-pil-
lar via a double joint. To adjust the desired
position of the monitor, proceed as follows:
–
Turn the wing screw (1) anti-clockwise to
loosen it. Hold the monitor with one hand.
–
Move the monitor to the desired position
and hold it.
–
Re-tighten the wing screw (1) by turning it
clockwise.
Depending on the cameras installed on the
truck, different images are transmitted to the
monitor:
Camera Monitor image
Front view camera in the lift mast Image always active
Rear view camera on the overhead guard Image always active
Front view camera in the lift mast + rear view
camera on the overhead guard
"Neutral" and "forwards" drive direction: image
from the front view camera
"Backwards" drive direction: image from the
rear view camera

Operating
4
Optical assistance systems
360 56368011501 EN - 04/2022 - 13