Still RX20 14-20, Оригинальное руководство пользователя

Страница: 491 / 600

Replacing the battery using a
lift truck and a battery change
frame
WARNING
Risk of accident due to overloading the lift truck!
The load capacity of the lift truck used must be
at least equal to the weight of the battery and the
weight of the change frame.
–
Observe the nameplates of the battery and of the
change frame.
CAUTION
Potential for damage to the battery!
–
Only position the battery change frame and the
battery on a firm surface with sufficient load-bear-
ing capacity.
–
Do not place the battery change frame and bat-
tery on a soft surface or in a rack.
Battery replacement using a lift truck is carried
out using change frames. The battery remains
on the change frame for charging and storage.
Preparation
–
Check the nameplate (3) on the change
frame to ensure that the selected change
frame has the required load capacity.
–
Check the change frame for deformation
and breaks or cracks.
Faulty change frames must not be used. They
must be replaced by the authorised service
centre.
The distance between the feet (6) can be ad-
justed to ensure that the change frame picks
up the battery precisely.
–
To adjust the feet (6), loosen the mount-
ing (5).
–
Adjust the feet (6) of the change frame ac-
cording to the dimensions of the fork arms.
–
Retighten the mounting (5).
The side stop (1) must also be adjusted.
–
To adjust the side stop (1), loosen the
mounting (2).
1
2
3
4
8
9
5
5
6
7

Operating
4
Replacing and transporting the battery
475 56368011501 EN - 04/2022 - 13