Still RX20 14-20 Скачать руководство пользователя страница 180

Страница: 180 / 600

Selecting the drive direction

The drive direction of the truck must be selec-

ted using the drive direction switch/drive direc-

tion selection lever before attempting to drive.

The method of actuating the drive direction

switch/drive direction selection lever depends

on the operating devices that are fitted in the

truck.
The drive direction switch is located on the

operating devices for the hydraulic functions.

The drive direction selection lever is located

on the travel direction selector and indicator

module (variant).

NOTE

The drive direction can also be changed dur-

ing travel. Your foot can remain on the accel-

erator pedal while you do so. The truck is then

decelerated and accelerated again in the op-

posite direction (reversing).

The indicator for the selected drive direction

("forwards" (1) or "backwards" (2)) lights up on

the display-operating unit.

Neutral position

If leaving the truck for a prolonged period, the

neutral position must be selected in order to

avoid the truck suddenly moving off due to an

inadvertent actuation of the accelerator pedal.

–

Briefly select the drive direction switch/drive

direction selection lever for the direction op-

posite to the current drive direction.

The drive direction indicator on the display-op-

erating unit goes out.

NOTE

When the seat is vacated, the selected drive

direction is set to the "neutral position". To

drive, the drive direction switch/drive direction

selection lever must be actuated again.



Operating

Driving

164

56368011501 EN - 04/2022 - 13

Содержание RX20 14-20

























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX20 14-20

Отзывы:

Бренды по названию

Популярные бренды

Still RX20 14-20, Оригинальное руководство пользователя

Результаты поиска

Содержание RX20 14-20

Отзывы:

Бренды по названию

Популярные бренды