Still RX20 14-20, Оригинальное руководство пользователя

Страница: 498 / 600

Replacing the battery using a
hydraulic battery carrier (variant)
DANGER
The battery weight and dimensions affect the stabil-
ity of the truck.
The weight ratios must not be changed when replac-
ing the battery. The battery weight must remain with-
in the weight range specified on the nameplate. The
location of ballast weights must not be changed.
Prerequisites
WARNING
Risk of injury when extending the battery.
The battery is extended out into the marked area (1).
People must not stand in this area.
The area (1) extends over the width of the battery
compartment and the extension range of the battery
carrier.
–
Only stand in the operator's position (2).
The following prerequisites must be fulfilled
when replacing a battery using a hydraulic
battery carrier:
●
The extension area (1) must be free of ob-
stacles.
●
The ground must clean, even and offer suf-
ficient load capacity.
●
The fork must be safely set down on the
ground
●
The parking brake must be applied
●
The emergency off switches on the driver's
compartment and on the carriage of the bat-
tery carrier must be unlocked
●
The operator must be in the operator's posi-
tion (2)
●
The battery cable must be long enough to
connect to the plug connection of the bat-
tery carrier without being stretched
NOTE
When the battery is deeply discharged (less
than 10% capacity), it cannot be removed. In
this case, connect a reserve battery or charge
the battery in the truck.

Operating
4
Replacing and transporting the battery
482 56368011501 EN - 04/2022 - 13