Still RX20 14-20, Оригинальное руководство пользователя

Страница: 531 / 600

Maintenance - 3000 hours/every two years
At operating hours
3000 6000 9000 12000 15000
Carried
out
 
Note
Perform all 1000-hour maintenance work.
Power unit
Change the gearbox oil in the drive wheel unit.
Replace the bleeder screws on the drive wheel units.
Hydraulics
Change the hydraulic oil.
Replace the return line filter and the breather filter.
Variant: Replace the high-pressure filter.
Ordering spare parts and wear-
ing parts
Spare parts are provided by our spare parts
service department. The information required
for ordering parts can be found in the spare
parts list.
Only use spare parts as per the manufactur-
er's instructions. The use of unapproved spare
parts can result in an increased risk of acci-
dents due to insufficient quality or incorrect
assignment. Anyone using unapproved spare
parts shall assume unlimited liability in the
event of damage or harm.
Quality and quantity of the re-
quired operating materials
Only the operating materials specified in the
maintenance data table may be used.
–
The required consumables and lubricants
can be found in the maintenance data table.
Oil and grease types of a different quality
must not be mixed. This negatively affects the
lubricity. If a change between different manu-
facturers cannot be avoided, drain the old oil
thoroughly.
Maintenance
5
General maintenance information
515 56368011501 EN - 04/2022 - 13