Still RX20 14-20, Оригинальное руководство пользователя

Страница: 512 / 600

DANGER
Risk of accident from the truck crashing!
Steering movements can cause the rear of the truck
to veer off the loading bridge towards the edge. This
may cause the truck to crash.
–
Before driving across a loading bridge, ensure
that the loading bridge is properly attached and
secured.
–
Ensure that the transport vehicle onto which the
truck is to be driven has been sufficiently secured
to prevent it from shifting.
–
Maintain a safety distance from edges, loading
bridges, lorry ramps, working platforms etc.
–
Drive slowly and carefully onto the transport vehi-
cle.
Wedging the wheels
–
Park the truck securely.
–
Secure the truck against rolling away by
placing a wedge (1) in front of each front
wheel and behind each back wheel.
CAUTION
Potential for damage to the battery male connector!
If the battery male connector is disconnected while
the key switch is on (under load), an arc will be
produced. This can lead to erosion at the contacts,
which considerably shortens the service life of the
contacts.
–
Switch off the key switch before disconnecting the
battery male connector.
–
Do not disconnect the battery male connector
while the key switch is switched on, except in an
emergency.
–
Ensure that the key switch is switched off.
–
Disconnect the battery male connector.
NOTE
If the electric parking brake (variant) cannot be
triggered electrically, it must be applied man-
ually; see the section entitled "Manual opera-
tion of the electric parking brake".
6210_001-012_V3

Operating
4
Transporting the truck
496 56368011501 EN - 04/2022 - 13