Still RX20 14-20 Скачать руководство пользователя страница 521

Страница: 521 / 600

Rings, metal bracelets etc. must be removed

before working on electric components.
To prevent damage to electronic systems with

electronic components, such as an electronic

driving regulator or lift control, these compo-

nents must be removed from the truck prior to

the start of electric welding.
Work on the electrical system (e.g. connecting

a radio, additional headlights etc.) is only per-

mitted with approval from the authorised serv-

ice centre.

Safety devices

After maintenance and repair work, all safety

devices must be reinstalled and tested for op-

erational reliability.

Set values

The device-dependent set values must be

observed when making repairs and when

changing hydraulic and electrical components.

These are listed in the appropriate sections.

Lifting and jacking up

DANGER

There is a risk to life if the truck tips over!
If not raised and jacked up properly, the truck may

tip over and fall off. Only the hoists specified in the

workshop manual for this truck are allowed and are

tested for the necessary safety and load capacity.

–

Only have the truck raised and jacked up by the

authorised service centre.

–

Only jack the truck up at the points specified in the

workshop manual.

The truck must be raised and jacked up for

various types of maintenance work. The au-

thorised service centre must be informed that

this is to take place. Safe handling of the truck

and the corresponding hoists is described in

the truck's workshop manual.

Maintenance

Safety regulations for maintenance

505

56368011501 EN - 04/2022 - 13

Содержание RX20 14-20

























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX20 14-20

Отзывы:

Бренды по названию

Популярные бренды

Still RX20 14-20, Оригинальное руководство пользователя

Результаты поиска

Содержание RX20 14-20

Отзывы:

Бренды по названию

Популярные бренды