Still RX20 14-20, Оригинальное руководство пользователя

Страница: 268 / 600

NOTE
The display always displays the next lift limit
that is in the path of the current lifting move-
ment. The next lift limit at which the function
will intervene is highlighted in grey in the
display. As soon as the fork carriage nears
the lift limit and the function intervenes, the
display turns black.
Lifting beyond the current lift limit
To lift beyond the current lift limits, proceed as
follows:
–
When the fork carriage reaches the set lift
limit and stops automatically, move the op-
erating device to the zero position.
–
Then push the operating device back into
the "lifting" direction.
–
You now have one second to bring the op-
erating device back to the zero position and
then move the operating device in the "lift-
ing" direction again.
The fork carriage is raised higher.
If the symbol disappears, the fork is at or
above the intervention height.
If the fork carriage is lowered to below the
configured lift height for the intermediate lift
cut-out, the intermediate lift cut-out function is
switched on again.
WARNING
Risk of accident due to unintentional switch-off of the
intermediate lift cut-out.
If the truck is also equipped with the "intermediate lift
cut-out" variant and the shake function is performed
close to an intermediate lift cut-out lift limit, this may
inadvertently cancel the lift limit.
This can happen if the operating device has to be
moved twice in order to cancel the lift limit. If the op-
erating device for the shake function is then repeat-
edly actuated, this can cancel the lift limit. The fork
carriage then moves beyond the lift limit during the
shaking process. This can cause the fork carriage to
collide with higher objects.
–
Do not perform the shake function close to the lift
height of a lift limit.
–
Cancel the lift limit by pressing the "F button". See
the following section.
Operating
4
Lift height-dependent assistance systems
252 56368011501 EN - 04/2022 - 13