Still RX20 14-20 Скачать руководство пользователя страница 477

Страница: 477 / 600

To read the battery charge status, see the

section entitled "Checking the battery charge

status".

–

Park the truck securely.

–

Open the battery door completely.

–

Disconnect the battery male connector.

–

Keep away from naked flames. Do not

smoke.

–

Check the battery cables for damage.

If necessary, have the battery cables re-

placed by the authorised service centre.

DANGER

There is a risk of damage, short circuiting and ex-

plosions!

–

Do not place any metal objects or tools on the

battery.

–

Keep away from naked flames.

–

Do not smoke.

–

Connect the battery male connector to the

plug on the battery charger.

–

Start the battery charger.

The charging process starts automatically.

The display signals the charging process by

illuminating the LEDS as a chase light.
The battery charger will indicate when the bat-

tery is fully charged. Only disconnect the bat-

tery from the charger if no current is flowing.
The battery has no memory effect. Therefore,

it can be charged in any charge state without

the capacity of the battery being impaired.

NOTE

Observe the following with regard to the ambi-

ent temperature during charging:

●

The charging process takes considerably

longer with the

X-Line lithium-ion battery

and an ambient temperature of ≤ 0°C.

●

It is not possible to charge the

C-Line lithi-

um-ion battery at an ambient temperature of

< 5°C.

Operating

Handling the lithium-ion battery

461

56368011501 EN - 04/2022 - 13

Содержание RX20 14-20

























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX20 14-20

Отзывы:

Бренды по названию

Популярные бренды

Still RX20 14-20, Оригинальное руководство пользователя

Результаты поиска

Содержание RX20 14-20

Отзывы:

Бренды по названию

Популярные бренды