Still RX20 14-20 Скачать руководство пользователя страница 496

Страница: 496 / 600

Installing the battery

–

Pick up the battery and transport it to the

truck.

–

Position the battery cable on the battery so

that it will not become trapped when the

battery is inserted.

–

Position the battery at a right angle to the

truck.

CAUTION

Potential for damage to the battery!
If the lifting eyes protrude from the lithium-ion battery

(variant), they will strike the truck chassis and bend.

–

Before inserting the lithium-ion battery (variant),

push the lifting eyes down in the tray and make

sure that they do not protrude.

NOTE

Do not straighten any bent lifting eyes. In-

stead, have them replaced by the authorised

service centre.

–

Carefully insert the battery into the battery

compartment.

–

Carefully place the battery onto the battery

holding fixtures.

DANGER

Risk of crushing/shearing!
When inserting, do not allow your hands

to come between the battery and the

chassis.

CAUTION

Potential for damage to the battery ca-

ble!

–

Position the battery cable on the bat-

tery in such a way that it cannot be

crushed either when removing or in-

serting the battery or when closing

the battery door.

–

Once the battery is correctly positioned in

the battery compartment, carefully lower the

battery.



Operating

Replacing and transporting the battery

480

56368011501 EN - 04/2022 - 13

Содержание RX20 14-20

























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX20 14-20

Отзывы:

Бренды по названию

Популярные бренды

Still RX20 14-20, Оригинальное руководство пользователя

Результаты поиска

Содержание RX20 14-20

Отзывы:

Бренды по названию

Популярные бренды