Still RX20 14-20 Скачать руководство пользователя страница 103

Страница: 103 / 600

Adjusting the steering column

–

Pull up and hold the lever (2) for steering

column adjustment.

–

Position the steering column (1), then push

the lever down again and allow the steering

column to engage.

DANGER

Risk of accident!

–

Ensure that the steering column is positioned se-

curely.

The steering column must click into place.
Never adjust the steering column while driving.

Adjusting the swivelling display-

operating unit

If the truck is equipped with multi-lever opera-

tion, the display-operating unit is swivel-moun-

ted on the right A-pillar.
The display-operating unit can be swivelled

from the neutral position to 15° to the left,

right, up and down. The unit cannot rotate

around its own axis.
To change the resistance for adjusting the dis-

play-operating unit, there are two socket head

screws (2) on the support for the display-op-

erating unit. The hexagon socket wrench for

emergency lowering can be used to loosen or

tighten the socket head screws (2).

–

Loosen the socket head screws (2) as re-

quired.

–

Hold the display-operating unit (1) in place.

–

Adjust the display-operating unit (1) so that

it can be read without glare.

–

Tighten the socket head screws (2) as re-

quired.

6219_003-012_V2



6219_003-235



Operating

Checks and tasks before daily use

56368011501 EN - 04/2022 - 13

Содержание RX20 14-20

























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX20 14-20

Отзывы:

Бренды по названию

Популярные бренды

Still RX20 14-20, Оригинальное руководство пользователя

Результаты поиска

Содержание RX20 14-20

Отзывы:

Бренды по названию

Популярные бренды