Sony MKS-6550, Руководство пользователя

Страница: 119 / 454

USO
RESTRITO
Basic DME Wipe Setting Operations for Independent Key Transitions
119
No. Parameter Adjustment
1 H Horizontal position
2 V Vertical position
Ch
a
p
te
r 6
DM
E
W
ip
e
s
“Dead Zone”
Transitions
Cropping
t: Transition execution time
y: Change in transition and
cropping amount
DME Wipe Modify Clear
Press [Default Recall] at the lower left of the menu screen,
turning it on, then press the [DME Wipe] VF6 button to
return the DME wipe settings to their initial status.
Independent Key Transition DME
Wipe Pattern Selection
For details about patterns and pattern groups that can be
selected,
1 “DME wipe execution mode and pattern
numbers that can be used” (p. 112) . Other patterns cannot
be selected, even if displayed on the screen. Also, patterns
cannot be used in two-channel mode on the MVS-3000.
1
In the Key1 DME Wipe Adjust menu, press [1ch] in
the <Pattern Select> group for one-channel mode, or
[2ch] for two-channel mode.
The 1ch Pattern Select menu (1116.4) or 2ch Pattern
Select menu (1116.5) appears.
2
Press the button of the desired DME wipe pattern
group to select it.
The selected group pattern appears on the screen.
To perform a DME wipe using the resizer
Select [Resizer Slide], [Resizer Squeeze], or [Resizer
Frame I/O] in the DME wipe group.
3
Press the button to select the desired pattern.
For details about initial status,
1
“Saving User-Defined
Settings” (p. 317)
.
Basic DME Wipe Setting
Operations for
Independent Key
Transitions
You can set independent key transition DME wipes in the
DME Wipe Adjust menu for each keyer.
This section describes an example using key 1 on the M/E-
1 bank.
Open the M/E-1 >Key1 >Transition menu (1116), select
[DME Wipe Adjust], and display the Key1 DME Wipe
Adjust menu (1116.3).
For an overview of independent key transitions,
1 “Independent Key Transitions” (p. 74)
.
Setting Independent Key Transition
DME Wipe Modifiers
You can add modifiers such as pattern position and size for
an independent key transition DME wipe.
For an overview of modifiers,
1 “DME Wipe Pattern
Variations and Modifiers” (p. 114) .
Setting the DME wipe position (Positioner)
For details about applicable pattern numbers, see
“Positioner” in
“DME Wipe Pattern Variations and
Modifiers” ( 1
p. 114) .
1
In the <Position> group of the Key1 DME Wipe
Adjust menu, press [Position], turning it on.
2
Set the following parameters.
To return the pattern position to the center of the
screen
In the <Position> group, press [Center].