USO
RESTRITO
System Maintenance
323
5
Repeat steps
2
to
4
, to select all of the lock candidates.
6
Press [Lock].
7
Enter the password with a maximum of 16 characters
in the keyboard window, and press [Enter].
If the password is correct, the menus selected in the list
of candidates are all locked. The padlock icon changes
Ch
a
p
te
r 17
S
y
s
te
m
S
e
tu
p
Formatting a Local Disk
If a file system corruption error has occurred on the local
disk, you should format the local disk.
1
In the <Local Disk> group of the Engineering Setup
>System >Maintenance menu (7317), press [Format].
Notes
When the local disk is operating normally, pressing
[Format] has no effect.
2
Press [Yes].
3
Press [OK].
Locking the Setup Menu Settings
To protect data, you can inhibit operations in selected areas
of the Setup menu. Use the following procedure. It is not
possible to lock the Setup Operation Lock menu.
1
In the Engineering Setup >System >Maintenance
menu (7317), press [Setup Operation Lock].
The Setup Operation Lock menu (7317.1) appears.
2
In the <VF Group> group, select the group including
the desired menu.
3
Select the menu or the set of menus as candidates for
the locking operation.
You can also select a menu while it is open.
For details,
“Selecting an opened Setup menu for
4
Press [Lock Item Select].
This makes the selected menus candidates for locking,
and a padlock icon appears in the “Lock” column
(in the unlocked state).
to the locked state
.
Releasing the lock
1
In the Setup Operation Lock menu (7317.1), press
[Lock].
2
Enter the password in the keyboard window.
Changing the lock password
1
In the Setup Operation Lock menu (7317.1), press
[Change Password].
2
Press [Yes].
3
Enter the old password and new password when
prompted.
Selecting an opened Setup menu for
locking
With the menu you want to lock open, press [Lock Item
Select] at the lower left.
VF buttons
Notes
If there are already one or more locked menus,
selection of lock candidates is not possible.
To deselect a lock candidate
After selecting a menu, press [Lock Item Select] once
more, to clear the “Lock” column.
To deselect all lock candidates in the selected VF
Lock Item Select button
HF buttons
group
Press [Lock Item All Clear].
[Lock Item Select] turns red, and a padlock icon appears.
