Sony MKS-6550, Руководство пользователя

Страница: 227 / 454

USO
RESTRITO
Control of P-Bus Devices
227
1
Open the Device >P-Bus Timeline >P-Bus Timeline
menu (5321).
Two lists appear in the status area. The left list displays
the combinations of devices and actions. The settings
in this list will be saved as keyframe point data.
The right list is for selecting the action.
2
Select the ID (0 to 23) of the device you want to set.
3
Select the action.
You can select from 2 (Store), 3 (Recall), and 4
(Trigger).
4
Set the register number or trigger number.
The indication for the 3rd parameter changes to reflect
the selection of Store, Recall, or Trigger.
Ch
a
p
te
r 11
E
x
te
rn
a
l De
v
ic
e
s
•
Copy
•
Move
•
Swap
•
Merge (this cannot be carried out for registers containing
VTR, disk recorder, or Extended VTR control data.)
•
Lock
•
Name
File-related functions
You can save and recall files as effects data using the File
menu.
Notes
Using the P-Bus timeline function requires the P-Bus
control mode to be set to [Timeline]. Make this setting in
the Engineering Setup >Panel >Device Interface menu
(7325)
(
1
p. 339) .
Setting an action
Control of P-Bus Devices
You can control P-Bus (Peripheral II protocol) devices
from this system through the switcher Remote 1 to Remote
4 ports or DCU 9-pin serial port.
P-Bus device control modes
There are two modes of P-Bus device control, as follows.
Trigger: Operating a previously specified button outputs
the command for an action assigned to that button.
Timeline: Carrying out a keyframe effect under the
control of the control panel controls external devices.
In the Setup menu, select which of Trigger mode and
Timeline mode to use.
You can set the following actions (set what action
command is output to which device) in either mode.
•
Store
•
Recall
•
Trigger
Creating and Editing the P-Bus
Timeline
At a keyframe point on the P-Bus timeline, you can set an
action. At any single keyframe point you can set actions
for a maximum of 24 devices.
For details about keyframe creation and editing
operations,
1 “Creating and Editing Keyframes”
(p. 250) .
For the action setting (or P-Bus timeline editing), use the
Device menu.
You can save the data set in the Device menu in keyframe
effect registers. Recalling the register starts execution of
the keyframe effect, and when this reaches the keyframe
point at which actions are set, action commands are output
to external devices through the 9-pin serial port assigned to
P-Bus.
No. Parameter Adjustment
3 Store No Register number for Store
3 Recall No Register number for Recall
3 Trigger No Trigger number
5
Press [Set].
Repeat steps
2
to
5
if setting other devices.
Testing an action command
Press [Test Fire].
The action command is output from the switcher Remote 1
to Remote 4 ports or DCU 9-pin serial port.
Clearing an action setting
To clear the setting for separate devices
Select the device, select action 1 (Off), then press [Set].
To clear the action settings for all devices in a
single operation
Press [All Off].
Setting the action for a rewind operation
On the P-Bus timeline, when the [REWIND] button in the
Flexi Pad is pressed, the action set for the first keyframe is