Sony MKS-6550, Руководство пользователя

Страница: 96 / 454

USO
RESTRITO
96
Resizer
Ch
a
p
te
r 4
K
e
y
s
Center of image
For example, the upper
limit of the movement
range is here.
Hold the [ASP], [LOC], or [ROT] button down while
carrying out the operation of step
5
to enable fine
adjustment (fine mode).
5
Use the trackball for the operation.
Entering parameters
This operation is the same as in
“Entering Three-
Dimensional Parameter Values” (
1
p. 171) .
Functions that cannot be used with key rotation
When [Rotation Enable] is turned on, aspect ratio
parameters (Aspect X, Aspect Y, Aspect Ratio) cannot be
adjusted. In addition, defocus cannot be used.
Device control block operations for key
shrinking, magnification, rotation, and
movement
RSZR CTRL button
Resetting parameters
This operation is the same as in
“Resetting three-
dimensional parameter values” (
1
p. 172) .
Clearing resizer effects
To clear two-dimensional transform and rotation
parameters only and set the initial state
In the device control block, press the [CLR WORK BUFR]
button in the operation buttons.
Delegation buttons
Trackball
To clear all resizer parameters, and set the initial
state
In the device control block, press the [CLR WORK BUFR]
button in the operation buttons, twice in rapid succession.
For the initial state, you can select either the factory default
settings or user settings.
For details about the settings,
1 “Selecting the State at
Start-up” (p. 316) .
RENB
button ROT
button RSZR button
LOC button
Z-ring
Resizer Interpolation Settings
For example, to make the interpolation settings for key 1
of the M/E-1 bank, use the following procedure.
ASP button
1
Press the [RSZR CTRL] button, turning it on.
2
Use the delegation buttons to select the key to which
you want to apply a resizer function.
3
Press the [RSZR] button, turning it on.
4
Carry out the following operations.
•
To change the aspect ratio, turn on the [ASP] button.
•
To shrink, magnify, or move the key, turn on the
[LOC] button.
•
To rotate the key, turn on the [RENB] button and
then the [ROT] button. To specify the direction of
rotation, press [X] or [Y]. To adjust perspective,
press [Z].
1
In the M/E-1 >Key1 >Processed Key/Resizer menu
(1115), press [Resizer], turning it on.
2
In the <Resizer Effect> group, press [Resizer Process].
The Resizer Process menu (1115.3) appears.
3
In the <Video Field/Frame Mode> group and <Filter
Mode> group, make the interpolation settings.
This operation is the same as the DME interpolation
settings for the MKS-6570/MVE-8000A. For details,
“Interpolation Settings” ( 1
p. 217) .
However, the following points are different from the
operation of the MKS-6570/MVE-8000A.
• The signal formats for which “Field/Frame Mode”
can be set are 480i/59.94, 576i/50, 1080i/59.94, and
1080i/50.