Sony MKS-6550, Руководство пользователя

Страница: 201 / 454

USO
RESTRITO
Applying Special Effects (Nonlinear Effect Settings)
201
No. Parameter Adjustment
1 Density Degree to which image
disappears
2 Random Trail type and amount of stardust
No. Parameter Adjustment
1 Transition Degree of transition
2 Curve
Degree to which image periphery
expands
3 Aspect Aspect ratio of waveform
4 Angle Slant of waveform
No. Parameter Adjustment
1 H Horizontal center position of swirl
2 V Vertical center position of swirl
No. Parameter Adjustment
1 Density Degree to which image
disappears
2 Random
Degree of randomness in flying
out fragment positions
No. Parameter Adjustment
1 H Horizontal center position
2 V Vertical center position
No. Parameter Adjustment
1 Transition Swirl amount
2 Center Amount of rotation in center of swirl
3 Outer Amount of rotation outside of Area
4 Area Region of swirl
Ch
a
p
te
r 10
DM
E
O
p
e
ra
ti
o
n
s
When Rectangle, Star, Heart, or Ellipse was
selected in step 1
To make the fragments stardust
1
Press [Pixel], turning it on.
2
Set the following parameters.
To set the explosion center point
1
Press [Position], turning it on.
2
Set the following parameters.
Swirl Settings
You can set the amount of swirl, the swirl region, the
amount of rotation, and the swirl center position.
Applying the Swirl effect
In the Non Linear >Swirl menu (4141.26), set the
following parameters.
To make the tip of the swirl stardust
1
Press [Pixel], turning it on.
2
Set the following parameters.
To set the center position of the swirl
1
Press [Position], turning it on.
2
Set the following parameters.
Melt Settings
You can set the degree of transition, the degree of
extension in the image, the jaggedness of the melting
sections, and the amplitude, frequency, amount of
movement, and speed of the melting sections. You can also
set the slant of the borders, the shape of the sections that
begin to melt, and other parameters.
Applying the Melt effect
1
In the <Direction> group of the Non Linear >Melt
menu (4141.27), select the direction in which the
image melts away.
Up: Melting occurs upward.
Down: Melting occurs downward.
2
To make transition settings, press [Transition] and set
the following parameters.
No. Parameter Adjustment
1 Transition Degree of transition
2 Curve Degree to which image stretches
3 Random Degree of jaggies at melted part
3
To make wave settings for melting part, press [Border]
and set the following parameters.
No. Parameter Adjustment
1 Amp Amplitude of waves
2 Freq Frequency of waves
3
Offset
a)
Amount of wave phase offset
4 Speed
b)
Direction and speed of waves
5 Slant Slant of border
a) Set when Lock is on.
b) Set when Lock is off.