Sony MKS-6550, Руководство пользователя

Страница: 332 / 454

USO
RESTRITO
332
Cross-Point Settings
1
Press [User Color Select].
The User Color Select menu (7322.12) appears.
2
Select the object to set in the “Target” field on the left.
3
Select the desired color in the “Color” field on the
right.
The selected color is displayed in the list on the left.
4
Repeat steps
2
and
3
above to change colors, as
required.
5
Press [Execute].
Ch
a
p
te
r 18
Co
n
tr
o
l P
a
n
e
l S
e
tu
p
3
In the <Source Color> group, press one of [User Color
1] to [User Color 3].
To change the color assigned to User Color 1 to 3
Copying Cross-Point Assign Tables
The contents of a cross-point assign table can be copied to
another cross-point assign table, and vice versa.
Notes
The contents of a sub table cannot be copied to the main
table.
1
Open the Engineering Setup >Panel >Xpt Assign
>Table Copy menu (7322.8).
2
Select the copy source and copy destination table
numbers.
3
Press [Copy].
4
Check the message, then press [Yes].
3
Press [Table Assign Set].
Exporting Source Names and
Destination Names
To send the source names and destination names to the S-
Bus, use the following procedure.
1
Open the Engineering Setup >Panel >Xpt Assign
>Name Export menu (7322.9).
2
Set the destination station ID.
No. Parameter Adjustment
1 Station ID
Station ID setting
a)
a) If set to 255, the information is sent to all stations (with display of
“All”).
3
Press [Src Name Export].
This exports the source names to the station selected in
step
2
.
4
Press [Dest Name Export].
This exports the destination names to the station
selected in step
2 .
Notes
Since destination names cannot be selected freely,
fixed names are used.
Making Settings for Audio Mixer
Linking the audio mixer
Selecting Cross-Point Assign Tables
You can select the cross-point assign table to be used for
the M/E-1 or PGM/PST bank.
Notes
It is not possible to assign cross-point tables 5 to 14 to a bus
of a switcher operated by an MKS-8080/8082 AUX Bus
Remote Panel.
1
In the Engineering Setup >Panel >Xpt Assign menu
(7322), select the bank or bus.
2
Select a table.
Notes
For audio mixer operations in this system, it is necessary
to set Mixer ESAM-II for the DCU 9-pin serial port.
For details,
1
“Serial Port Settings” (p. 369)
.
1
In the Engineering Setup >Panel >Xpt Assign menu
(7322), select the bank or bus.
2
Press [Audio Follow].
“Enable” appears in the “Audio Follow” column.
Setting the audio mixer cross-points
To assign an audio mixer cross-point to a switcher cross-
point pair (video/key), carry out the following procedure.