Siemens Synco 700 RMS705B Скачать руководство пользователя страница 13

Страница: 13 / 213

2 Operation

Synco™ 700 units may only be operated by staff instructed by Siemens
Switzerland Ltd or its delegates and who understand the potential risks.

2.1

Operation without operator unit

The following operating elements on the RMS705B and extension module can be
used with the operator unit:

Switching and monitoring unit

Extension module

1 LED "RUN" device operating status display; with the following meanings:

LED lit:

Power on, no fault and periphery.

LED off:

No power or fault in the application / or periphery.

Key

2 Button

" " with LED (red) to display fault status message and its

acknowledgement:

LED flashes:

Fault status message ready to be acknowledged.

LED lit:

Fault status message pending, but not yet reset.

LED off:

No fault status message.

Press button:

Acknowledge fault or reset.

3 Programming button (Prog) to assign the device address in KNX system mode

(tool required).

4 Programming LED (Prog) to display programming process, with

meaning:

LED remains lit until addressing is completed.

5 LED (Run) to monitor power supply and addressing; with the following

meaning:

LED lit:

Power on, addressing successful.

LED flashes:

Supply voltage available, but RMS705B has no valid

KNX

address.

LED off:

power.

14 / 216

Siemens

Switching and monitoring device RMS705B

CE1P3124en

Building Technologies

Operation

01.04.2010

Содержание Synco 700 RMS705B






















































































































































































































Результаты поиска

Содержание Synco 700 RMS705B

Отзывы:

Siemens Synco 700 RMS705B, Основная документация, Страница: 13 / 213

Результаты поиска

Содержание Synco 700 RMS705B

Отзывы: