CAUTION
Children and the general public must be prevented from accessing or approaching the
equipment!
This equipment may only be used for the purpose specified by the manufacturer. Any
unauthorized modification and the use of accessories that are not sold or recommended by
the manufacturer of the equipment can cause fire, electric shock or injury.
The operator panel of the SINAMICS V10 inverter does NOT support plug and play. When
you are in an attempt to switch between LOC and REM control modes via an external signal
source, make sure that the communication between the operator panel and the inverter body
unit is in good condition.
NOTICE
Keep this manual as a handy reminder and make them available to all users, if necessary.
Identification
WARNING
Make sure that deliverables received are free from damage and in conformity with your
purchase order. Should any damage or inconsistence with the purchase order be found,
contact your local distributor or local dealer.
It's not permissible to put the equipment into use if it's damaged or short delivered.
Transport & Storage
CAUTION
Transport and storage must meet the specified environmental conditions (see topic Technical
data (Page 115) for details).
Installing
WARNING
Risk of fire or electric shock. Do not install the equipment in an area subject to inflammables
or combustibles, water or corrosion hazards.
Safety notes
SINAMICS V10
8
Operating Instructions, 08/2011, A5E03453178 (this is not an order number)
