NOTICE
The connection macro to be displayed by default depends on the actual wiring.
Make sure that your wiring corresponds with the connection macro selected.
For details, please see Typical connection modes (Page 39)
Connection macros available for setting in this mode
C01 to C11
Connection macro setting in "Connection macro selection" mode
Example: C07
Automatically
Inverter is confirming
the selection
Press
OK
OK
Turn
. . .
Figure 6-21 Connection macro setting example
NOTICE
If the inverter is confirming the selection of a connection macro, time consumption is about
50 seconds; if it is confirming the selection of an application macro, the time consumption is
about 20 seconds.
Button/keys inactive in this mode
The STOP, RUN and LOC/REM keys are inactive in this mode.
Commissioning
6.6 Overview of various operation modes
SINAMICS V10
68
Operating Instructions, 08/2011, A5E03453178 (this is not an order number)
