SICK Inspector PIM60 Скачать руководство пользователя страница 16

Страница: 16 / 84

command examples see Section B.1, “

Command syntax

” (page 52) and Section B.6, “

Com-

mand examples

” (page 77).

Note

The command syntax differs from other interfaces where the initial part

http://<IP-address>/CmdChannel?

is added and all space characters (" ") are replaced

by an underscore character ("_"). The ACK messages still contain spaces.

Example URL

The successful execution of the following command

http://192.168.1.110/CmdChannel?sINT_1_1

will perform the command (to select reference object with index 1) and then return the fol-

lowing string:

rsINT 1 0

while a failed command may return:

rsINT 1 8101 Ref bank index is not used.

3.3.3

Current reference object

The reference image of the current reference object can be retrieved using the URL:

http://<IP-address>/ActiveReferenceImage.jpg

The response to the request is a JPEG image.
The reference image of any reference object in the Inspector can be retrieved using the URL:

http://<IP-address>/getRefObject?0

where the argument "0" is the index of the reference object. The object index that corresponds

to each reference object can be found in the

Reference object

list in the

Main view

The response to the request is a JPEG image. An empty image with a smaller size than a

normal image is returned if no reference object is available for a certain position.

Example URL

http://192.168.1.110/ActiveReferenceImage.jpg

http://192.168.1.110/getRefObject?1

3.3.4

Backup and restore configuration

It is possible to backup and restore the device configuration through the Web API. This is the

same functionality also available through the standard web pages of the Web Server interface.
The backup data contains the device name and reference objects including corresponding

inspection and interface settings.

Note

The backup and restore functionality of the Web Server and the Web API corresponds to the

Export Sopas Parameter backup

and

Import Sopas Parameter backup

in the

InspectorPIM60

menu.

The backup data used by the Web API is saved as

.sbp

files, which can be imported to and

exported from

SOPAS Engineering Tool (ET)

. The Web API can not use

.sdv

files.

Backup configuration

The URL to export a configuration is

http://<IP-address>/backup_config?config1

Example URL:

http://192.168.1.110/backup_config?config1

The result of the request is an .spb file containing the device configuration. This file can be

stored in the file system of the receiving unit and used later in the restore procedure.

8015726/ZPP7/2018-

Subject to change without notice

Reference Manual

Web interface

Interfaces

Inspector PIM

Содержание Inspector PIM60





















































































Результаты поиска

Содержание Inspector PIM60

Отзывы:

Похожие инструкции для Inspector PIM60

Бренды по названию

Популярные бренды

SICK Inspector PIM60, Справочное руководство

Результаты поиска

Содержание Inspector PIM60

Отзывы:

Похожие инструкции для Inspector PIM60

Бренды по названию

Популярные бренды