SICK Inspector PIM60 Скачать руководство пользователя страница 6

Страница: 6 / 84

Introduction

The Reference Manual is a complement to the Operating Instructions for Inspector PIM60

and covers the functionality of all product variants.
The Reference Manual contains detailed information about the interfaces including syntax

and available functionality. It focuses on Inspector PIM60 specific topics and does not describe

the basic technology behind each interface.
The details of the result output formatting and the contents and syntax of the command

channel are shared by several interfaces. They are described in an appendix valid for all rel-

evant interfaces.
For instructions on configuring the interfaces, refer to the Operating Instructions.

1.1

Interfaces overview

The Reference Manual contains detailed information for the following interfaces:
•

I/O Extension Box

is used to increase the number of available input and output connections

•

Web API

interface is intended for integration with external HMI implementations, and for

customized web pages on the Inspector

•

Ethernet Raw

interface is intended for integration with external PLC equipment

•

EtherNet/IP

interface is intended for integration with external PLC equipment following the

EtherNet/IP communication standard

1.2

Intended readers

The intended readers of the Reference Manual are users working with integration between

the Inspector PIM60 and other equipment, for example PLC programmers and customized

human machine interface (HMI) developers.
The readers are assumed to have knowledge about the Inspector PIM60 product and features

as described in the Operating Instructions for Inspector PIM60. The readers are also assumed

to have knowledge about the basic functionality of the technology of the interfaces used for

the integration.

8015726/ZPP7/2018-

Subject to change without notice

Reference Manual

Introduction

Inspector PIM

Содержание Inspector PIM60





















































































Результаты поиска

Содержание Inspector PIM60

Отзывы:

Похожие инструкции для Inspector PIM60

Бренды по названию

Популярные бренды

SICK Inspector PIM60, Справочное руководство

Результаты поиска

Содержание Inspector PIM60

Отзывы:

Похожие инструкции для Inspector PIM60

Бренды по названию

Популярные бренды