SICK Inspector PIM60, Справочное руководство

Страница: 43 / 84

Comment Binary Range Attribute Value tag Container tag
Return -1 if defect detection is
not active or no defect found.
Undefined for single edge tool.
Coordinate of the first found
pixel that was within the defect
REAL coordUnit DEFECT_Y
thresholds. In “pixels” or “mm”
depending on attribute “co-
ordUnit” or configured value in
the
Ethernet Result output
dialog.
Return -1 if defect detection is
not actived or no defect found.
Undefined for single edge tool.
"All"
b
iterates over all polygon
corners. Number 0 to 15 gives
{0, 1,
...,15, all}
corners CORNERS
a
the properties of a single
corner. The index of this corner
is the order in which the poly-
gon corner was added when
the polygon was drawn.
Polygon corner coordinate. In
“pixels” or “mm” depending on
REAL
c
REAL coordUnit X
attribute “coordUnit” or con-
figured value in the
Ethernet
Result output
dialog.
For a polygon with two corners
(single edge) the estimated
corner positions are the inter-
section between the found
edge and the left and right
borders of the search region.
The search region is defined by
the user drawn edge and the
position search parameter. See
also Operating Instructions for
Inspector PIM60 about Single
edge tool.
Polygon corner coordinate.
“pixels” or “mm” depending on
REAL
c
REAL coordUnit Y
attribute “coordUnit” or con-
figured value in the
Ethernet
Result output
dialog.
For a polygon with two corners
(single edge) the estimated
corner positions are the inter-
section between the found
edge and the left and right
borders of the search region.
The search region is defined by
the user drawn edge and the
position search parameter. See
also Operating Instructions for
Inspector PIM60 about Single
edge tool.
43
©SICK AG • Identification & Measuring • www.sick.com • All rights reserved
Subject to change without notice
8015726/ZPP7/2018-
09
Appendix
Result output formatting
Reference Manual
Inspector PIM