SICK Inspector PIM60, Справочное руководство

Страница: 74 / 84

Range Return val-
ues
Arguments Usable
in Run
mode
Iden-
tifier
Com-
mand
Description
[0, 7] - int index
c
string name
[0, 31], - int referenceOb-
ject
Yes 9 gSTR Get name of edge
tool
[0, 63] -
int index
a
string name
[0, 31], - int referenceOb-
ject
Yes 10 gSTR Get name of circle
[0, 63] -
int index
a
string name
[0, 31], - int referenceOb-
ject
Yes 11 gSTR Get name of
Measure distance
[0, 63] -
int index
a
string name
[0, 31], - int referenceOb-
ject
Yes 12 gSTR Get name of
Measure angle
[0, 63] -
int index
a
string name
[0, 31], - int referenceOb-
ject
Yes 13 gSTR Get Edge counter
name
[0, 4] -
int index
a
string name
[0, 31], - int referenceOb-
ject
Yes 14 gSTR Get all tool names
(except the Object
Locator)
[0, 1] (0=CSV
format,
-
string list of
names
int format
1=JSON
format)
d
a
For information about tools indexing see Section B.2.5, “ Tools indexing ” (page 54)
b
For information about blob indexing see Section B.2.2, “ Blob indexing ” (page 54)
c
For information about polygon indexing see Section B.2.4, “ Polygon indexing ” (page 54)
d
CSV (Comma separated values) in accordance with RFC 4180
JSON (JavaScript Object Notation) in accordance with RFC 4627
B.4 Error codes
The tables below list error codes that may result from commands or configuration of the
device. The error codes are valid for EtherNet/IP, Ethernet Raw, and Web Server. Both error
code and an explaining text are shown when using Ethernet Raw for configuring the device
through the command channel. When using EtherNet/IP for configuring the device through
the command channel will only view the error code.
8015726/ZPP7/2018-
09
©SICK AG • Identification & Measuring • www.sick.com • All rights reserved
Subject to change without notice
74
Reference Manual
Command channel
Appendix
Inspector PIM