NOTICES
WARRANTY
Without prejudice of legal warranty, the product is covered under a 2 year warranty by
manufacturer from the date of purchase. Please provide the proof of purchase when you
return the item to the supplier. The warranty covers manufacturing defects only. The warranty
is voided by any unauthorized repairs, misuse, misapplication, tampering of the product,
modifications, upgrading or results of any failures to follow the guidelines as set out in the
product brochure or by any of the actions specified in this brochure or anywhere in our
technical publishing released to the public from time to time which would have voided the
warranty. Your product must be registered at uclear-digital.com upon purchase.
Warranty does not cover data recovery and physical deterioration due to use, damages
resulting from accidents, storage, loss or data loss or damage during repairs or transits. The
sender will bear all transportation charges for functioning products but which were declared
defective.
LIMITATIONS OF WARRANTY
All product warranties for the product by are limited to those mentioned in the product
manual. You must register your product upon purchase at uclear-digital.com, and warranty
period is good for two years from purchase date.
WAIVER AND DISCLAIMER
BITwave, and all their representatives, partners, agents, distributors, suppliers and resellers
shall not be liable and will be held harmless from any and all litigation, claims, debts,
demands, actions and liability which may arise, directly or indirectly, from operating or using
the product for any damages, losses, distress, pain, suffering, discomfort, loss and injuries
including bodily harm illness, strains, fractures, partial and/or total paralysis, death or other
ailments that could cause serious disability either to any persons, or any parties whether the
user or other third parties or their possessions, or to any goods, vehicles, properties, assets
among others including your own suffered by any persons, organizations, or any third parties
whether physical or otherwise and which may accrue to you in the future, to the fullest extent
permitted by law as a result of the use, operation, malfunctioning, misuse, disposal or repairs
of the product or any other reasons, conditions or circumstances or attempts to do so whether
due to negligence, omissions, or otherwise of BITwave, or any of their representatives,
partners, agents, .distributors, suppliers, resellers, designer, manufacturer or any others in its
supply and distribution chain or any third parties involved.
All risks from operating or usage
of the product rest solely and entirely with the user of this product, the original purchaser or
any third parties, who assumes full responsibility for all injuries, losses and/ or damages,
whether caused in whole or in part by the negligence, omissions or other conduct of others,
including that of BITwave, and all their representatives, partners, agents, distributors,
suppliers, resellers and all others in its supply and distribution chain either due to the
designer’s or manufacturer’s negligence or omissions or any third parties involved.
CORRECT DISPOSAL OF THIS PRODUCT
Do not dispose this product with other household wastes at the end of its working life. There
is a separate collection system for used electronic products in accordance with legislation
that requires proper treatment, recovery and recycling. Household users should contact either
the retailer where they purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling. Business users
should contact their suppliers and refer to the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
PRODUCT INFORMATION
BITwave, and all their representatives, agents, distributors, suppliers or resellers shall not be
held responsible for any consequences arising from any errors or omissions in the guide or
resulting directly or indirectly from the use of the information herein. BITwave reserves the
right to amend or improve the product design or user guide without any restrictions and
without any obligation to notify users. All information here is accurate as of the date of
printing.
Please periodically check for the latest firmware version to receive feature enhancements
on www.uclear-digital.com
PERSONAL SAFETY
Do not open the seal of the hardware, tamper, repair or modify any parts. Do not touch the
product with metal objects or parts or chemical products. Violation of the above will lead to
potential fire hazards and mishaps. Please contact the technical support or your local
supplier if your product malfunctions.
Always comply with the local law and traffic regulations. Where use of the product is not
permitted or allowed by any laws and regulations including the traffic laws of your country,
we warn you not to go against such restrictions.
You will bear the full responsibilities of any breaches of Law and Regulations.
You should not allow the operations or use of the product or any attempts to use it by any
persons including yourself to compromise anyone’s safety including your own or to cause
harm to any vehicles, property, objects, livestock, inventories, assets and the like under any
circumstances. You or any users of the product are to take all necessary safety measures and
precautions and to remain alert to all surrounding conditions. You are warned not to operate
the product if you are not physically capable of doing so in a safe manner, if you have or will
consume any alcohol or any mind-altering substance during its operation so that your
alertness is compromised or if you have any medical conditions or needs that may
compromise your abilities to do so in a safe manner. We warn you of the inherent,
unforeseeable and unlimited risks and dangers in using the product while in traffic, including
injury or illness, strains, fractures, partial and/or total paralysis, death or other ailments that
could cause serious disability due to any causes. This product is only for use by persons
eighteen (18) years of age and above who have understood the warnings, risks and the terms
of use. You confirm that you have read this release of liability and fully understand its terms
and that you have given up substantial rights by using or attempting to use the product.
EQUIPMENT NOTICES
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the Equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End user must follow the specific operating instructions for satisfying RF
exposure compliance. This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter. The portable device is designed to meet the
requirements for exposure to radio waves established by the Federal Communications
Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram
of tissue. The highest SAR value reported under this standard during product certification for
use when properly worn on the body is 0.044 W/kg.
BATTERY WARNING
The UCLEAR helmet communicator contains a rechargeable lithium ion polymer battery. To
reduce risks of fire or burns, do not disassemble, crush, puncture, short external contacts or
dispose in fire or water.
CHARGING NOTICE
To reduce the risk of personal injury, electrical shock, fire or damage to equipments, please
follow all the instructions below:
- Do not immerse the product, AC adaptor or speakers in water.
- Do not install, place or use the product near any source of heat for example: stove, radiator,
oven, toaster, coffee maker or other apparatus that gives off heat.
- Always use the provided AC power adaptor and cable included in the package to charge the
product. Use of any incorrect power supply to charge the product may cause permanent
damage to the product and render the warranty void.
CONTACT AND SUPPORT INFORMATION
For USA Tech support and warranty department.
M-F 8am-5pm MST. 1-855-248-9283
BITwave USA LLC
1488 E lron Eagle Dr.
Eagle, ID 83616
1-855-BIT-WAVE
For additional information please visit our website at www.uclear-digital.com
LICENCES
The UCLEAR trademark and logo is exclusively owned by BITwave Pte Ltd. Any use of the
mark by any other parties without prior written permission of BITwave Pte Ltd constitutes an
infringement of legal rights. The Bluetooth trademark is owned by Bluetooth SIG and is used
under licence by BITwave Pte Ltd.
COPYRIGHTS
Copyright © 2016 BITwave Pte Ltd. All rights reserved. No part of this guide may be
reproduced in any form or by any process whatsoever without prior written consent from
BITwave Pte Ltd.
FCC NOTICES
FCC COMPLIANCE STATEMENT FCC ID:NMCHBC200
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operations.
Note: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Any modifications to the equipment will void
the manufacturer’s warranty.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) This device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device. This Class[B] digital
apparatus complies with Canadian ICES-003.
Cet appareil s’accorde avec Industrie Canada licence-exempte RSS standard.
(1) cet appareil ne peut pas causer l’intervention, et (2) cet appareil doit accepter de
l’intervention, y compris l’intervention qui peut causer l’opération non désirée de. Cet
appareil numérique de la classe B est conforme à la norme NMB-003 du Canada
AMP SERIES USER GUIDE
> Please note that there are some countries that by law disallow the rider to set the UCLEAR
Unit to a volume that prevents you hearing your surroundings.
> Please note that in some countries the use of both speakers simultaneously is authorized
only out of public traffic conditions.
> Please check with the relevant authorities for local safety legislation before using UCLEAR
unit on the road.
> Please learn how to use the buttons by looking into the mirror before using the UCLEAR
unit on the road.
> Prolonged exposure to loud sounds may lead to permanent hearing damage.
> Speaker volume is greater than 90 dB may lead to permanent hearing damage.
> Do not attempt to place an outgoing call through the mobile phone while riding on
the motorcycle at any point of time.
> Please do not use the UCLEAR Unit in anyway that may distract you or hinder your
judgement while on the move. Never ever compromise your safety and the safety of others.
> Charging and handling rechargeable battery products incorrectly may cause them to
overheat, catch fire or explode. To prevent this please follow the instructions below:
i) Never change the batteries yourself, always contact UCLEAR-Digital to perform the
replacement for you.
ii) When charging, use
ONLY the charging cable provided or a replacement cable from a
UCLEAR Digital dealer. Using similar, compatible or any other cables may lead to
permanent product damage and will void the product warranty.
> Never make any modifications to any part of the UCLEAR Digital Unit in any way as it may
cause the system to malfunction causing hurt to you.
> Do not modify your helmet to use with this system - it is not necessary to do so.
PLEASE READ THROUGH THE OPERATING INSTRUCTIONS TO UNDERSTAND HOW TO OPERATE THE
AMP SYSTEM, IN PARTICULAR THE SAFETY INSTRUCTIONS.
ATTENTION
WARNING
WARNING
THANK YOU FOR PURCHASING OUR AMP SERIES BLUETOOTH COMMUNICATION
UNITS. OUR CUSTOMERS ARE OUR TOP PRIORITY, AND WE STRIVE FOR 100%
SATISFACTION. IF YOU HAVE ANY QUESTIONS ON HOW TO OPERATE, INSTALL OR
GENERAL QUESTIONS ABOUT THE AMP UNIT OR IT’S ACCESSORIES PLEASE DO NOT
HESITATE TO CONTACT US.
