Sequoia LISST-200X, Руководство пользователя

Страница: 77 / 112

LISST-
200X User’s Manual
69 LISST-200X Operation Details
Description: The ZD (or zd) command resets the depth sensor offset so that the sensor
reads a depth of 0m at zero depth (in air). You must issue the ZD
command, then select 1 (yes) or 0 (no) to reset depth sensor
Example:
L200x:> ZD
Depth sensor offset adjust.
Instrument must be at zero depth and similar temperature to
field conditions.
Reset depth sensor offset? (1=yes,0=no): [0] ? 1
Previous offset was -140.65. New offset is -4.37.
Previous depth was -136.28 meters.
New depth using corrected offset is 0.00 meters.
3.
Acquisition/Action commands
DL Delete file from LISST memory
Syntax: DL filename , where filename is the name of the file to be deleted.
Description: DL command is used to delete file from memory.
Example:
L200x:> DL L3231513.RBN
Delete the file 'L3231513.RBN'?
Y for Yes or N for No: [N] ? Y
Deleting L3231513.RBN
Deleted.
Cautions: WARNING: Make sure the file being deleted has already been offloaded.
Once the file is deleted it cannot be recovered.
GO Start Data Collection using current Settings
Syntax: GO
Description: Starts Fixed Rate or Burst Mode Data collection using current settings.
Example:
L200x:> GO
Starting sampling.
Start condition: Delay Start with 2 minute delay
Stop condition: Stop after 100 samples
Low-power sleep until 2021/12/10 17:39:56
zzz...Waiting until 2021/12/10 17:39:56
Cautions: To stop data acquisition before it is complete, send 2 Ctrl-C characters.
GX Grab sample and transmit it
Syntax: GX
Description: Acquires single averaged sample and displays the result to the screen.
Example: Input: GX
Output: {
…. 36 ring 24 Aux parameters
}
Notes: The GX command does not store the sample to a datafile.