Sequoia LISST-200X, Руководство пользователя

Страница: 76 / 112

LISST-200X Operation Details 68 LISST-
200X User’s Manual
ST,
STARTCOND Set Start Condition
Syntax: ST x or STARTCOND x where x is the start condition code described
below
Description: The ST command sets the start condition to be used when the GO
command is issued. The start condition options are:
1 = Depth Start
2 = Time/Date Start
3 = Mechanical Switch Start
4 = Digital Input Start
5 = Delay Start
If no value follows command, prompts will be displayed for the value.
After setting the start condition to Depth, Time or Delay, use STARTDATA
to set the applicable condition value.
Example:
L200x:> ST 5
Start condition: 5
TD,
STARTDATA Set Start Condition Data
Syntax: TD x or STARTDATA x where x is the start condition data described below
Description: The TD command sets the start condition data to be used when the GO
command is issued. The start condition data is used with the Start
Condition setting as follows:
•
If the Start Condition is Depth Start (option 1) the input will be start
depth in meters.
•
If the start condition is set to Time/Date Start (option 2) the input for TD
will be the start date and time.
•
If the Start Condition is Delay Start (option 5) the input will be time
delay in minutes.
•
The TD setting is ignored for Mechanical Switch Start (option 3) or
Digital Input Start(option 4).
If no value follows command, prompts will be displayed for the value.
Example: If Start Condition = 1 (Depth Start)
L200x:> STARTDATA 3
Start condition: Depth Start at 3 meters
If Start Condition = 2 (Time/Date Start)
L200x:> STARTDATA 2020/12/31 23:59:59
Start condition: Time Start at 2020/12/31 23:59:59
If Start Condition = 5 (Delay Start)
L200x:> STARTDATA 2
Start condition: Delay Start with 2 minute delay
ZD Reset Depth Sensor Offset
Syntax: ZD