Sequoia LISST-200X, Руководство пользователя

Страница: 45 / 112

LISST-
200X User’s Manual
37 LISST-200X Operation Details
•
Slide the endcap with battery holder attached out of
the main housing.
3
•
Slide the clear cover off of the battery holder and
install the two D cell batteries.
•
Install with the positive “button” end toward the end
cap of the housing.
•
Slide the clear cover over the batteries such that the
rubber pad is pushing against the batteries as shown
in the picture above
Batteries installed.
4
•
Check that the o-ring in the endcap and the mating
surface on the main housing are clean. Lightly grease
with silicone grease as needed.
•
Carefully insert the assembly back into the main
housing until the o-ring makes contact with the
housing. Align the thumbscrews with the holes in the
main housing and push the endcap on until it is flush
with the housing.
•
Tighten the thumbscrews by hand (DO NOT USE
ANY TOOL). DO NOT OVERTIGHTEN.
Battery assembled and
ready for use.