Sequoia LISST-200X, Руководство пользователя

Страница: 44 / 112

LISST-200X Operation Details 36 LISST-
200X User’s Manual
5.
Using the Small External Battery Housing
The LISST-200X comes with a Small External Battery Housing that can be used for short
term deployments. The instructions in this section describe how to use the Small Battery
including installing and charging the NiMH rechargeable batteries.
NOTE: the Small
Battery Housing cannot be used to power the LISST-HAB or LISST-Black (see page
90) or BioBlock (page 93).
STEP ACTION RESULT
1
•
The LISST-200X Small External Battery Housing uses
two rechargeable NiMH D-cell batteries. Four of the
1.5V 10000mAh batteries and a charger are included
with the housing. The batteries are not installed when
the instrument a new instrument is shipped. It is
recommend that the batteries be removed from the
housing when not in use. Leaving the batteries in the
housing will cause the batteries to discharge and
could cause damage to the cells.
Batteries fully charged.
•
Fully charge the batteries using the provided charger.
Fully discharged batteries will take about 8 hours to
charge.
NiMH battery charger
2
•
The Small Battery Housing is made of plastic and has
an endcap with two underwater connectors and two
captive thumbscrews on one end.
•
Loosen the thumbscrews. Note that the screws will
not need to be fully removed. They are designed to
be removed from the main housing but still remain
attached to the endcap. The screws can be removed
if you continue to rotate the screws through the
threaded holes in the endcap.
Battery open and ready
for batteries