Sequoia LISST-200X, Руководство пользователя

Страница: 48 / 112

LISST-200X Operation Details 40 LISST-
200X User’s Manual
•
Remove the batteries making note of their orientation.
•
Insert the batteries into the pressure case. Labels on
the inside surface of the center divider will guide you
on the orientation of the batteries for each stack.
4
•
Inspect the o-ring on the endcap and the seating
surface on the pressure case to make sure there is no
debris that could affect the seal. Lightly grease the
surfaces as needed.
•
Align the tab in the center of the endcap to the slot in
the post in the center of the pressure case
Endcap re-installed
5
•
Screw the connector endcap onto the pressure case
with the four 6-32 x ¾ socket head cap screws. If
necessary, apply anti-seize compound onto the
threads.
Battery assembled and
ready for use.
6
•
The battery housing can be connected to the LISST-
200X using the provided 5-pin Male to 5-pin Female
cable.
•
Connect the Male end of the cable to the Female
Bulkhead connector on the Battery Housing. The
connec
tor will be labeled with “TO LISST”.
Instrument is powered
and ready to collect
data