Sakura Tissue-Tek Polar DM, Руководство по эксплуатации

Страница: 35 / 132

1-20
Explanation of Right-of-Screen Button Area
The "Log On"/"Log Off" button, "Chamber Illumination" button, "Manual Ozone cycle" button
and "Cryo+" button common to all tab screens are shown on the right side of the screen.
•
Log on/log off button
Press the "Log On" button, and the screen will accept
operation inputs. In a logged-off state, none of the buttons
other than "Log On" or the tabs can be used unless the
user is authenticated by the password entered. Once the
password is entered, the button changes to the "Log Off"
button. Refer to p. 1-48 for the details of account settings.
•
Chamber illumination button
Press the "Chamber Illumination" button to turn on the
LED lights in the chamber. Press it again to turn off the
lights.
•
Manual ozone cycle button
Press the "Manual Ozone Cycle" button to start manual ozone disinfection cycle. Ozone cycle
takes approx. 75 minutes to complete. No other operation is performed while the treatment is
in progress. Refer to p. 2-19 for details.
•
Cryo+ button
Press the "Cryo+" button to start Cryo+ cooling. Press it again to stop the cooling.
Once the cooling is started, the snowflake icon changes as follows.
A short animation showing that chamber is being cooled is played, switching from the standby
mode and once the cooling temperature of -50
°
C or below is achieved, the snowflake icon
turns white. Cooling will continue for 15 minutes after the button is pressed. After that, the
cooling system returns to the standby mode.
Explanation of Status Display Area
When handwheel lock tab, TRIM or other function is used, the corresponding icon is displayed
in the status display area at the bottom of the screen.
When vacuum is used
* The vacuum level is displayed as either HIGH or LOW.
When lock tab is used
* This icon is displayed when the handwheel is locked (DM only).
When TRIM is used * This icon is displayed when the TRIM button is pressed. The number in the icon
indicates the set value.
When the right panel (motorized
sectioning) is used
* This icon is displayed during motorized sectioning.
* The icon blinks while motorized sectioning is paused.
When the foot switch is used
* This icon is displayed when the foot switch is enabled. It changes to while
operation is performed on the right panel.
Log on
button Log off
button
Chamber
illuminatio
n ON
button Chamber
illuminatio
n OFF
button