SAEVO EVUS 8, Руководство пользователя

Страница: 96 / 150

8 Using 3D
86 Basic User Manual
NOTE:
Only volume probes are capable of using this feature.
8�2�4 Setting Render Mode
Surface, Skel and X-Ray can be set.
●
Surface
is used to display the contour of fetus.
● Skel is used to display the spinal column and skeleton of the fetus.
● X-Ray is used to display the tissues of different structure and tumor tissues.
Perform the following steps to set the render mode.
1. Select the
Menu key and a menu pops up on the screen.
2. Select Render Mode by using the ↑ or ↓ key.
3. Rotate the Menu key or select the ← or → key to make the setting.
NOTE:
The imaging render mode can also be set in the inactivated 3D mode.
8�2�5 Cropping Reviews
You can crop 3D image by tracing its border, adjusting a box or using the eraser.
■ Cropping reviews with trace
You can crop the image by tracing its border to remove areas outside the area of interest. This feature is suitable for
cropping irregular reviews.
Perform the following steps to crop a review.
1. Select the
Menu
key and a menu pops up on the screen.
2. Select Edit by using the ↑ or ↓ key.
3. Select TraceI or TraceO by rotating the Menu key or selecting the ← or → key.
− Set it to
TraceI
to enable the feature and remove all data inside the traced area from the image.
− Set it to
TraceO
to enable the feature and remove all data outside the traced area from the image.
4. Move the cursor to the image by using the trackball, select the Set key, and then trace the border of the object.
5. Select the Set key to acquire the desired image.
In the following figure, Trace cut is set to
TraceI
.